[Elecraft] Feature Request: Implement AN$ command for subrx antenna selection

[Barry N1EU]

That would be an excellent solution!

73, Barry N1EU

On Thu, Feb 4, 2016 at 5:01 AM, Joe Subich, W4TV <lists at subich.com> wrote:

>
> That would be inconsistent with the use of AN which selects between
> transmit antennas in K3/K3S equipped with a KANT3/KANT3A tuner.
>
> The appropriate solution would be an entirely new command (RXA/RXA$)
> where RXA0; set the Main RX to Main antenna, RX1; set the Main RX to
> the RX Antenna, RXA$0; set the Sub RX to use the currently selected
> Main RX antenna and RXA$1; set the Sub RX to use either Aux or the
> *unused* (non-transmit) port on the KANT3.
>
> In other words, 0 = RX Ant OFF, 1 = RX Ant on based on the user's
> hardware configuration.
>
> 73,
>
>   ... Joe, W4TV
>
>
>
> On 2/3/2016 7:25 AM, Barry N1EU wrote:
>
>> This is a straightforward feature request:  implement the $ version of the
>> AN command so that AN$1; sets subreceiver to Main Ant and AN$2; sets
>> subreceiver to AUX
>>
>> 73, Barry N1EU
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
>>
>> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1eu.barry at gmail.com
>