[Elecraft] Feature Request: Implement AN$ command for subrx antenna selection

[Joe Subich, W4TV]

That would be inconsistent with the use of AN which selects between
transmit antennas in K3/K3S equipped with a KANT3/KANT3A tuner.

The appropriate solution would be an entirely new command (RXA/RXA$)
where RXA0; set the Main RX to Main antenna, RX1; set the Main RX to
the RX Antenna, RXA$0; set the Sub RX to use the currently selected
Main RX antenna and RXA$1; set the Sub RX to use either Aux or the
*unused* (non-transmit) port on the KANT3.

In other words, 0 = RX Ant OFF, 1 = RX Ant on based on the user's
hardware configuration.

73,

   ... Joe, W4TV


On 2/3/2016 7:25 AM, Barry N1EU wrote:
> This is a straightforward feature request:  implement the $ version of the
> AN command so that AN$1; sets subreceiver to Main Ant and AN$2; sets
> subreceiver to AUX
>
> 73, Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>