[Elecraft] K3 macro for Subrx antenna?

[Barry N1EU]

Thanks Dick but a switch toggle won't work - the result is indeterminate
unless there's a way to reset to a known value first.  Is there a key
sequence that will place the subreceiver antenna selection in a known state?

Barry N1EU

On Tue, Feb 2, 2016 at 1:34 AM, RIchard Williams <richarddw1945 at yahoo.com>
wrote:

> Barry,
>
> Yes, there is a command that will do exact what you want.   If you take a
> look at the Programmer's  Reference (which you can download on the Elecraft
> site), you will find the command on page 23 in Table 7.  The command is
> SWT25;
>
> Keep in mind this is a "toggle" command.  The command will toggle the Sub
> RX Ant on and off (just like tapping the RS ANT button on the K3).  You
> will probably want to use this command in combination with other commands
> to make up a macro for whatever you are trying to accomplish.
>
> Dick, K8ZTT
>
>
>
> ------------------------------
> *From:* Barry N1EU <n1eu.barry at gmail.com>
> *To:* elecraft <elecraft at mailman.qth.net>
> *Sent:* Monday, February 1, 2016 6:02 PM
> *Subject:* [Elecraft] K3 macro for Subrx antenna?
>
> Does anyone know a way to program a K3 macro to set the Subreceiver antenna
> selectively to Main or Aux?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richarddw1945 at yahoo.com
>
>
>