[Elecraft] K3 macro for Subrx antenna?

[RIchard Williams]

Barry,
Yes, there is a command that will do exact what you want.   If you take a look at the Programmer's  Reference (which you can download on the Elecraft site), you will find the command on page 23 in Table 7.  The command is SWT25;
Keep in mind this is a "toggle" command.  The command will toggle the Sub RX Ant on and off (just like tapping the RS ANT button on the K3).  You will probably want to use this command in combination with other commands to make up a macro for whatever you are trying to accomplish.
Dick, K8ZTT
 

      From: Barry N1EU <n1eu.barry at gmail.com>
 To: elecraft <elecraft at mailman.qth.net> 
 Sent: Monday, February 1, 2016 6:02 PM
 Subject: [Elecraft] K3 macro for Subrx antenna?
   
Does anyone know a way to program a K3 macro to set the Subreceiver antenna
selectively to Main or Aux?

Thanks & 73,
Barry N1EU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to richarddw1945 at yahoo.com