[Elecraft] KXPA100 with PX3

[rsoifer1 at aol.com]

Hi Ryan,


Yes, I am using the control cable.  


73 Ray



-----Original Message-----
From: Ryan Noguchi <ai6do at yahoo.com>
To: rsoifer1 <rsoifer1 at aol.com>; elecraft <elecraft at mailman.qth.net>
Sent: Fri, Dec 30, 2016 8:43 am
Subject: Re: [Elecraft] KXPA100 with PX3



>>http://www.elecraft.com/manual/PX3_installation_FAQ_v-0-8.pdf  see Figure 3.


>When I tried that, I got no output from the KXPA100 with the KX3 PA MODE set to ON.  If I set that to OFF, I get full output but then not full interaction with the KX3.  What am I doing wrong?




So are you saying that you have the KX3, PX3, and KXPA100 all connected in the exact manner depicted in Figure 3 (which also appears in the PX3 manual) and you're still experiencing this problem? Maybe I'm mistaken, but it sounds like you aren't using the KX3-KXPA100 adapter cable. You can't just connect the KXPA100 RS232 port directly to the KX3 ACC1 port.



73, Ryan AI6DO