[Elecraft] Hi SWR on 40mtrs

[W0MU Mike Fatchett]

I was going to say the same thing.  You are on the wrong Ant.


On 12/26/2016 3:38 PM, Don Wilhelm wrote:
> Bill,
>
> Check to see which antenna is selected.  Having the K3 set for ANT2 
> while the antenna is set for ANT1 will cause that behavior.
>
> 73,
> Don W3FPR
>
> On 12/26/2016 5:23 PM, Bill Ellis via Elecraft wrote:
>> Hi all,
>> My K3 has been operating quite well until yesterday. I went to 
>> tune-up om 40 mtrs and the autotuner registered 25:1. On all other 
>> bands, it tunes properly. I then put my analyzer on the coax in the 
>> shack and it read 2.1:1. Should not be a problem for the autotuner. 
>> From what I'm seeing, the problem appears to be with the K3. What am 
>> I missing here?
>> Thanks for any help.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com