[Elecraft] Hi SWR on 40mtrs

[Don Wilhelm]

Bill,

Check to see which antenna is selected.  Having the K3 set for ANT2 
while the antenna is set for ANT1 will cause that behavior.

73,
Don W3FPR

On 12/26/2016 5:23 PM, Bill Ellis via Elecraft wrote:
> Hi all,
> My K3 has been operating quite well until yesterday. I went to tune-up om 40 mtrs and the autotuner registered 25:1. On all other bands, it tunes properly. I then put my analyzer on the coax in the shack and it read 2.1:1. Should not be a problem for the autotuner. From what I'm seeing, the problem appears to be with the K3. What am I missing here?
> Thanks for any help.