[Elecraft] KX3 and FLDIGI

[John Pitz]

I have been and it seems to work just fine.  I have made contacts using
that setup with PSK31 and have decoded PSK31, RTTY, as well as one other
mode-can't remember which at the moment.  I have also been told rather
emphatically that fldigi would not work with the IQ signal.  My
experience is it works just fine.  The width of the spectrum is quite a
bit less than what I think a full panadaptor would give.



On Fri, 2016-12-02 at 14:43 -0500, Kevin - K4VD wrote:

> When using the KX3 with fldigi can I use the RX I/Q output from the radio
> to the computer? I can't find any reference to i/q in the fldigi docs so
> I'm assuming the answer is no but thought I'd ask before giving up.
> 
> Kev K4VD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to crustacean at brig-elec.com
>