[Elecraft] KX2 vs KX3 paddle

[Chip Stratton]

Easy enough to file the long screw down to match the short screw in length.
Still works fine.

Chip AE5KA

On Mon, Aug 29, 2016 at 6:22 PM, Ron D'Eau Claire <ron at cobi.biz> wrote:

> Yes. But there is no issue using the KXPD2 paddles on a KX3.  And one can
> order a second short screw for the KXPD3 so they can be used on either rig
> as well. Order E700245 from Elecraft.
>
> The long(er) screw does nothing for the installation on a KX3 either, so
> there's no reason to have it.
>
> 73, Ron AC7AC
>
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Rose
> Sent: Monday, August 29, 2016 3:12 PM
> To: Elecraft Reflector
> Subject: [Elecraft] KX2 vs KX3 paddle
>
> I -think- there's an issue with the one of the screws for the KX3's paddle
> being too long with danger of it damaging a board if it's used on a KX2.
>
> 73!
>
> K0PP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to ron at elecraft.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lightdazzled at gmail.com
>