[Elecraft] No sub-receive after repair

[Brian F. Wruble]

That did it. I was not receiving on the "Main" antenna.  Thanks!

On Saturday, August 27, 2016, Joe Subich, W4TV <lists at subich.com> wrote:

>
> Check the Owner's Manual for "RX ANT" ...
>
> Turn on the Sub RX and *hold* the RX ANT button.  What does the VFO B
> area of the display say?
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 8/27/2016 10:30 AM, Brian F. Wruble wrote:
>
>> Hi all:
>>
>> I recently sent my K3 back to Elecraft for repair.  I had attempted to
>> install the new KAT3A, and I messed up the subreceiver, and I lost my
>> output power.  I also had them install the new KXV3B so that I could have
>> the built-in 6 meter preamp.
>>
>> Elecraft returned my rig, received yesterday, and cautioned me to use the
>> new config files they had set up.  I am finding that I cannot get signals
>> on the sub-receiver.
>>
>> Here is my setup:
>>
>> KRX3 Ant = BNC  (same as before the repair)
>> KXV3B  =  Nor
>> L - Mix - R  = A   b
>> KAT3  =  byP  (I use the KAT500)
>> SPKRS = 2
>> SPKR + PH = YES
>> SUB AF = bALAnCE
>>
>>
>> I find that if I load my last saved config file, before the mods, the
>> subreceiver works fine --- I can rotate Balance and move the sub-receive
>> audio to my right earphone, keeping the main receive audio in my left
>> earphone.
>>
>> This is obviously a config problem, and I don't want to keep using the old
>> config file because it doesn't recognize the new KXV3B..
>>
>> Can anyone suggest what I am doing wrong here?
>>
>> 73 de Brian W3BW
>>
>> *Brian F. Wruble, C.F.A.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
>>
>>

-- 

*Brian F. Wruble, C.F.A.