[Elecraft] No sub-receive after repair

[Joe Subich, W4TV]

Check the Owner's Manual for "RX ANT" ...

Turn on the Sub RX and *hold* the RX ANT button.  What does the VFO B
area of the display say?

73,

    ... Joe, W4TV


On 8/27/2016 10:30 AM, Brian F. Wruble wrote:
> Hi all:
>
> I recently sent my K3 back to Elecraft for repair.  I had attempted to
> install the new KAT3A, and I messed up the subreceiver, and I lost my
> output power.  I also had them install the new KXV3B so that I could have
> the built-in 6 meter preamp.
>
> Elecraft returned my rig, received yesterday, and cautioned me to use the
> new config files they had set up.  I am finding that I cannot get signals
> on the sub-receiver.
>
> Here is my setup:
>
> KRX3 Ant = BNC  (same as before the repair)
> KXV3B  =  Nor
> L - Mix - R  = A   b
> KAT3  =  byP  (I use the KAT500)
> SPKRS = 2
> SPKR + PH = YES
> SUB AF = bALAnCE
>
>
> I find that if I load my last saved config file, before the mods, the
> subreceiver works fine --- I can rotate Balance and move the sub-receive
> audio to my right earphone, keeping the main receive audio in my left
> earphone.
>
> This is obviously a config problem, and I don't want to keep using the old
> config file because it doesn't recognize the new KXV3B..
>
> Can anyone suggest what I am doing wrong here?
>
> 73 de Brian W3BW
>
> *Brian F. Wruble, C.F.A.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>