[Elecraft] KPA500 strange response

[Don Wilhelm]

How did you determine that the cables seem "fine".
Did you do a continuity measurement on each pin?  Did you check for 
shorts between adjacent pins.

If selecting 12 meters on the K3 produces 6 meters on the KPA500, then 
there may be something awry with the BAND1 data output from the K3 to 
the KPA100.  That is pin 3 of the cable.

73,
Don W3FPR

On 8/3/2016 8:12 PM, Harlan Sherriff wrote:
> Both cables seem ok. Also, if I select 12m on K3, the KPA goes to 6m. I'm just a little confused.
>
>