[Elecraft] KPA500 strange response

[Harlan Sherriff]

Solved. It was one of the cables. Anyway I believe so. I took the KAT out of the control loop and all is well with one of the cables but bad news with the other. Must be intermittent as it ohm 'd ok. 

Sent from my iPhone

> On Aug 3, 2016, at 8:05 PM, Harlan Sherriff <hsherriff at reagan.com> wrote:
> 
> Tom
> They both seem fine. 
> 
> Sent from my iPhone
> 
>> On Aug 3, 2016, at 5:50 PM, tomb18 <tomb18 at videotron.ca> wrote:
>> 
>> Hi
>> Check your 15 pin cable.
>> 73 Tom 
>> va2fsq.com 
>> 
>> 
>> 
>> Sent from my Samsung Galaxy smartphone.
>> 
>> -------- Original message --------
>> From: Harlan Sherriff <hsherriff at reagan.com>
>> Date: 2016-08-03 5:43 PM (GMT-05:00)
>> To: Elecraft Email <elecraft at mailman.qth.net>
>> Subject: [Elecraft] KPA500 strange response
>> 
>> No matter how I change bands (k3, KPA front panel switches, or KPA utility), if I select 20m band, the KPA front panel displays 21.1. If the K3 is turned off, the KPA responds correctly to front panel switches or utility buttons. I have reloaded both K3 and KPA firmware to no avail. If I send rf out, the KPA switches to and displays the 20m band. Any ideas?
>> 
>> Sent from my iPhone
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to tomb18 at videotron.ca
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hsherriff at reagan.com