[Elecraft] KPA500 on a Network

[Michael Walker]

Thanks

I'll do the IP version.  No big deal.

I do run a number of RS232 over IP devices already as well.  Until I get up
to the remote base with some spare time, I can do this change remotely.

I appreciate it.

Mike va3mw


On Wed, Apr 27, 2016 at 3:16 PM, Ken K6MR <k6mr at outlook.com> wrote:

> Yes. Run one copy of the remote program as the host. On your client
> machine run the remote program and click “Connect”, put in the IP address
> and port.
>
> An easier way (though a bit more expensive) is to get a serial port
> server. I have the Startech 4 port server that connects me to two KPA500
> and two KAT500. They appear as normal serial ports on the client and you
> connect using the remote program.
>
> But if you’ve already got the computer on the host end the software is
> free :^)
>
> Ken K6MR
>
>
>
> From: Michael Walker
> Sent: Wednesday, April 27, 2016 10:26
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] KPA500 on a Network
>
>
>
>
>
>
> I likely have not spend enough time on this, but as I redo my remote base,
> I am finding that the I have the KPA500 RS232 port on one computer, but I
> operating on another computer.
>
> With its 'hosting' interface, is there a way to have the client software
> connect to the server software on a totally different IP address on the
> same network?
>
> Mike va3mw
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6mr at outlook.com
>
>
>
>