[Elecraft] KPA500 on a Network

[Ken K6MR]

Yes. Run one copy of the remote program as the host. On your client machine run the remote program and click “Connect”, put in the IP address and port.

An easier way (though a bit more expensive) is to get a serial port server. I have the Startech 4 port server that connects me to two KPA500 and two KAT500. They appear as normal serial ports on the client and you connect using the remote program.

But if you’ve already got the computer on the host end the software is free :^)

Ken K6MR



From: Michael Walker
Sent: Wednesday, April 27, 2016 10:26
To: Elecraft at mailman.qth.net
Subject: [Elecraft] KPA500 on a Network






I likely have not spend enough time on this, but as I redo my remote base,
I am finding that the I have the KPA500 RS232 port on one computer, but I
operating on another computer.

With its 'hosting' interface, is there a way to have the client software
connect to the server software on a totally different IP address on the
same network?

Mike va3mw
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com