[Elecraft] KX3 - How to enable RF output meter? Stuck in ALC display

[David Orman]

Perfect, I'm positive I have SSB+CW enabled right now. I'll go disable and
test again. Thank you so much for the quick answer!

Respectfully,
David

On Tue, Apr 26, 2016 at 12:58 PM, David Anderson <gm4jjj at yahoo.co.uk> wrote:

> David,
>
> This happens when SSB + CW is enabled.  In CW WGHT menu tap 1 to toggle
> between SSB+CW (enabled) and SSB -  CW
>
> Tapping Keyer/Mic knob toggles between Keyer speed and Mic Gain rather
> than Meter Scales  CMP/ALC and SWR/RF. The CMP/ALC scale is still shown
> temporarily when CMP or Mic Gain are adjusted.
>
> You can switch to DATA mode then change meter scales by tapping Keyer/mic
> knob then go back to SSB.
>
>
> 73 from David GM4JJJ
>
> > On 26 Apr 2016, at 16:54, David Orman <ormandj at corenode.com> wrote:
> >
> > Hi,
> >
> > I tried tapping the keyer/mic button to change the display to RF output
> > from ALC while in USB and LSB modes, and it doesn't switch over. I seem
> to
> > remember this working before. I am on the latest firmware. Is there a
> trick
> > to this I'm missing?
> >
> > Thank you,
> > David
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to gm4jjj at yahoo.co.uk
>
>