[Elecraft] KX3 - How to enable RF output meter? Stuck in ALC display

[David Anderson]

David,

This happens when SSB + CW is enabled.  In CW WGHT menu tap 1 to toggle between SSB+CW (enabled) and SSB -  CW

Tapping Keyer/Mic knob toggles between Keyer speed and Mic Gain rather than Meter Scales  CMP/ALC and SWR/RF. The CMP/ALC scale is still shown temporarily when CMP or Mic Gain are adjusted.

You can switch to DATA mode then change meter scales by tapping Keyer/mic knob then go back to SSB. 


73 from David GM4JJJ

> On 26 Apr 2016, at 16:54, David Orman <ormandj at corenode.com> wrote:
> 
> Hi,
> 
> I tried tapping the keyer/mic button to change the display to RF output
> from ALC while in USB and LSB modes, and it doesn't switch over. I seem to
> remember this working before. I am on the latest firmware. Is there a trick
> to this I'm missing?
> 
> Thank you,
> David
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gm4jjj at yahoo.co.uk