[Elecraft] Internal Speaker Update!

[Ron D'Eau Claire]

Picking up this thread late, but have you run into this situation? From the
Kit Assy Manual:

If you hear nothing in the speaker when first applying power to your K3S
(and no headphones
plugged in) hold CONFIG to access the configuration menu, then rotate VFO B
to display SPKR+PH.
Tap 1 on the numeric keypad until you see PH.R SW - and exit the menu.

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
pastormg2 at verizon.net
Sent: Tuesday, April 5, 2016 4:40 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Internal Speaker Update!

Here is an update to the internal speaker issue with my K3.
1. If I plug my headphones into the speaker jack in the back I hear audio.
2. But, for #1 to happen the speaker setting in config must be #2. If it is
#1, I get no audio.
3. I have even plugged in a new speaker I received from Elecraft yesterday
and I still don't get audio from the internal speaker.
4. I am going to send this information to Howard at Elecraft Service to get
his opinions on this.
5. Not sure whether the KIO3 board is defective or not. I have never moved
or done anything with the board for it to become unseated.

Mark Griffin, KB3Z