[Elecraft] Internal Speaker Update!

[Cady, Fred]

Given those symptoms I don't think this is it,  but you could try going to speaker+phones and tapping the 1 key to toggle between PH.R SW- and +.
Cheers,
Fred KE7X

For all KE7X Elecraft books, see www.ke7x.com



________________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of pastormg2 at verizon.net <pastormg2 at verizon.net>
Sent: Tuesday, April 5, 2016 5:39 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Internal Speaker Update!

Here is an update to the internal speaker issue with my K3.
1. If I plug my headphones into the speaker jack in the back I hear audio.
2. But, for #1 to happen the speaker setting in config must be #2. If it is #1, I get no audio.
3. I have even plugged in a new speaker I received from Elecraft yesterday and I still don't get audio from the internal speaker.
4. I am going to send this information to Howard at Elecraft Service to get his opinions on this.
5. Not sure whether the KIO3 board is defective or not. I have never moved or done anything with the board for it to become unseated.

Mark Griffin, KB3Z

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu