[Elecraft] Rerouting the KRX3 AUX Input from the Rear BNC to the KAT3

[Nr4c]

I put both cables in at build time. Unused one is routed into the shielded area and secured to the shield. 

Easy to re-configure. Take off top and change cables. A pair of surgical clamps may be useful. 

Sent from my iPhone
...nr4c. bill


> On Apr 1, 2016, at 1:56 PM, Sverre Holm (LA3ZA) <LA3ZA at nrrl.no> wrote:
> 
> When I built my K3 some years ago I routed the second receiver's AUX antenna
> input to the rear panel BNC connector. But now I have changed my mind and
> want to route it through the KAT3 instead, in order to try diversity
> reception. 
> 
> How complex is this to accomplish? I know I need to plug in another 30 cm
> tmp cable to the KRX3 board than the one I am using now. But how many panels
> do I need to remove from the K3? The top I'm sure I need to remove, but is
> that enough?
> 
> 
> 
> 
> 
> -----
> Sverre, LA3ZA
> 
> K2 #2198, K3 #3391,
> LA3ZA Blog: http://la3za.blogspot.com,
> LA3ZA Unofficial Guide to K2 modifications: http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Rerouting-the-KRX3-AUX-Input-from-the-Rear-BNC-to-the-KAT3-tp7615802.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com