[Elecraft] PX3 Span will only go up to 100Khz

[Eric Swartz - WA6HHQ, Elecraft]

Its up to 200 kHz in tracking mode and 100 kHz in fixed tune. 

73,

Eric
elecraft.com
_..._



> On Oct 6, 2015, at 12:15 PM, Cady, Fred <fcady at montana.edu> wrote:
> 
> Hi Roger,
> At some point, I don't remember when, in the development of the Fixed-Spectrum - Tuned VFO display mode they had to reduce the maximum span from 200 to 100 kHz.
> Cheers,
> Fred KE7x
> Author of:
> "The Elecraft K3: Design, Configuration and Operation 2nd ed"
> "The Portable Elecraft KX3 – Going for the Summit with the KX3 and KX3-2M/4M"
> “The Elecraft KX-Line – The Complete Station”
> “The Elecraft KPA500 and KAT500 – the K-Line Dream Station”
> Printed, coil bound copies of these are all available at www.elecraft.com
> KPA500 and KAT500 Quick Set Up Guide
> http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
> 
> KAT500 and KXPA500 Tuner Operation
> http://www.ke7x.com/home/kat500-and-kxpa100-tuners
> 
> “The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” printed copy available at www.lulu.com and pdf from www.ke7x.com.
> 
> “The Elecraft K3S and P3 – Getting the Most out from Your High Performance Station”  coming very soon.
> Plus a book dedicated to the K3S upgrades for the K3 and a 3rd Edition of the K3 book are works in progress.
> 
> 
> ________________________________________
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Roger Marrotte <marrotte at verizon.net>
> Sent: Tuesday, October 6, 2015 1:01 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] PX3 Span will only go up to 100Khz
> 
> I received my new PX3 yesterday.  It has firmware v1.25.  It's connected to
> my KX3.  It seems to be working as advertised and seems to be as good as my
> P3/K3 combo. My one question is: Why does the span only go up to 100. The
> manual says it should go up to 200.  I've tried turning STEP SPAN on and
> off.   I looked at the manual and searched the web and past emails and found
> no answer.  So, am I doing something wrong?
> 
> 
> 
> Roger, W1EM
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at montana.edu
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swartz at elecraft.com
>