[Elecraft] PX3 Span will only go up to 100Khz

Cady, Fred fcady at montana.edu
Tue Oct 6 15:15:59 EDT 2015


Hi Roger,
At some point, I don't remember when, in the development of the Fixed-Spectrum - Tuned VFO display mode they had to reduce the maximum span from 200 to 100 kHz.
Cheers,
Fred KE7x
Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Portable Elecraft KX3 – Going for the Summit with the KX3 and KX3-2M/4M"
“The Elecraft KX-Line – The Complete Station”
“The Elecraft KPA500 and KAT500 – the K-Line Dream Station”
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners

“The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” printed copy available at www.lulu.com and pdf from www.ke7x.com.

“The Elecraft K3S and P3 – Getting the Most out from Your High Performance Station”  coming very soon.
Plus a book dedicated to the K3S upgrades for the K3 and a 3rd Edition of the K3 book are works in progress.


________________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Roger Marrotte <marrotte at verizon.net>
Sent: Tuesday, October 6, 2015 1:01 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] PX3 Span will only go up to 100Khz

I received my new PX3 yesterday.  It has firmware v1.25.  It's connected to
my KX3.  It seems to be working as advertised and seems to be as good as my
P3/K3 combo. My one question is: Why does the span only go up to 100. The
manual says it should go up to 200.  I've tried turning STEP SPAN on and
off.   I looked at the manual and searched the web and past emails and found
no answer.  So, am I doing something wrong?



Roger, W1EM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu



More information about the Elecraft mailing list