[Elecraft] 2meter off Frequency

[Harry Yingst]

I ran into this, and what I found is the connection to the reference K144VX board was not good.(The center pin out on that connector had pushed out)



      From: Richard Thorpe <kissov at me.com>
 To: Elecraft List <elecraft at mailman.qth.net> 
 Sent: Saturday, November 28, 2015 11:36 AM
 Subject: [Elecraft] 2meter off Frequency
   
I have a K3 with the 2 meter board it has the K144VX ref lock board and the radio has the K3EXREF installed also installed are the KSYN3A boards.  With all these boards working the 2meter frequency is of by 5 kc.  The only way I can bring it back on frequency is by manually adjusting the frequency.  Any ideas as to what is causing this anomaly?  Thank you.

Richard K6CG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com