[Elecraft] 2meter off Frequency

[Kevin Stover]

You've got the external reference board...what's the external reference 
your using?
Is the external reference board configured correctly in the K3? Same for 
the ref lock?
Is the mode FM or SSB/CW?


On 11/28/2015 10:36 AM, Richard Thorpe wrote:
> I have a K3 with the 2 meter board it has the K144VX ref lock board and the radio has the K3EXREF installed also installed are the KSYN3A boards.  With all these boards working the 2meter frequency is of by 5 kc.  The only way I can bring it back on frequency is by manually adjusting the frequency.  Any ideas as to what is causing this anomaly?  Thank you.
>
> Richard K6CG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kevin.stover at mediacombb.net
>


-- 
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus