[Elecraft] P3 Showing Transmit Signal

[Gene Gabry]

I noticed this a few times as well with my K3S and P3. When it happened, I
was running a frequency, and I would go into TX sometimes before the P3
would unfreeze and the P3 would display my TX peak, following my modulation.
Seemed to maybe happen at some transition of the P3 going back to RX when I
keyed the microphone. Also noticed sporadic freeze decay of P3 after
stopping TX. Most times it switched to RX right away, but sometimes it hung
up for a second or two. I thought I was seeing things! 

Any ideas out there?

Gene, N9TF
K3S 10057 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bud
Governale
Sent: Tuesday, November 24, 2015 10:56 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3 Showing Transmit Signal

I noticed this weekend that occasionally during transmit instead of the scan
freezing in place it would continue scanning showing only my transmit signal
with only that signal appearing in the black waterfall.

I don't have the P3TXMON. It never did this before.

I was viewing the external SVGA monitor.

Any idea why?

73,

Bud W3LL





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to n9tf at comcast.net