[Elecraft] K3S KXV3B

[Wayne Burdick]

It will next week. 

Wayne

----
http://www.elecraft.com

> On May 14, 2015, at 2:45 PM, Ross Primrose <n4rp at n4rp.com> wrote:
> 
> Does the current K3 firmware support the KXV3B in the K3?
> 
> 73, Ross N4RP
> 
>> On 5/14/2015 1:47 PM, Lyle Johnson wrote:
>> The KXV3B, included as part of the basic K3S, has the functionality of the KXV3A plus the PR6-10.  You do not need to order it separately.
>> 
>> Unlike the PR6-10, the KXV3B does not tie up any of the accessory plug digital I/O lines to turn the preamp on and off.
>> 
>> 73,
>> 
>> Lyle KK7P
>> 
>>> So if I understand this correctly there is no need to order a KXV3B
>>> separately or a PR6 since both are now included standard in the K3S.
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n4rp at n4rp.com
> 
> 
> -- 
> FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com