[Elecraft] K3S KXV3B

[Ross Primrose]

Does the current K3 firmware support the KXV3B in the K3?

73, Ross N4RP

On 5/14/2015 1:47 PM, Lyle Johnson wrote:
> The KXV3B, included as part of the basic K3S, has the functionality of 
> the KXV3A plus the PR6-10.  You do not need to order it separately.
>
> Unlike the PR6-10, the KXV3B does not tie up any of the accessory plug 
> digital I/O lines to turn the preamp on and off.
>
> 73,
>
> Lyle KK7P
>
>> So if I understand this correctly there is no need to order a KXV3B
>> separately or a PR6 since both are now included standard in the K3S.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”