[Elecraft] K3 and FLdigi for PSK31

[Ross Primrose]

Also, on Windows, you can run the DXLabs suite, and add the 
fldigi-dxlabs gateway ( 
http://www.n2amg.com/software/fldigi-dxlabs-gateway/ ) and fldigi can 
talk to the commander part o fhte suite for rig control. It'll also 
integrate nicely with the logging & spotting portions of the suite as well.

73, Ross N4RP

On 5/6/2015 11:04 AM, Don Wilhelm wrote:
> Ramon,
>
> You need to use Hamlib or Rigcat with Fldigi - I think Hamlib is 
> easier, but YMMV.  Configure Fldigi to use whichever you have chosen.
> Connect the K3 to a COM port on your computer and tell Hamlib (or 
> Rigcat) which port that may be, and it should work.
>
> I 'hear tell' that FLRIG can give the same capability, but I have not 
> tried it.
>
> 73,
> Don W3FPR
>
>
> On 5/6/2015 8:59 AM, Ramon Tristani wrote:
>> I have successfully used the K3 with FLDigi and a Signalink USB for 
>> quite some time now. However, I have never tried to control or even 
>> display the frequency on my FLDigi screen (Mac or PC). What 
>> connection should I have to the K3 in order to achieve this? How 
>> should I configure FLDigi for that purpose? Any help will be most 
>> welcomed! Thanks!
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”