[Elecraft] K3 and FLdigi for PSK31

[Ramon Tristani]

Thanks for the good advice. I am looking forward to installation and test.
73,
Ramon


On 5/6/2015 11:04 AM, Don Wilhelm wrote:
> Ramon,
>
> You need to use Hamlib or Rigcat with Fldigi - I think Hamlib is 
> easier, but YMMV.  Configure Fldigi to use whichever you have chosen.
> Connect the K3 to a COM port on your computer and tell Hamlib (or 
> Rigcat) which port that may be, and it should work.
>
> I 'hear tell' that FLRIG can give the same capability, but I have not 
> tried it.
>
> 73,
> Don W3FPR
>
>
> On 5/6/2015 8:59 AM, Ramon Tristani wrote:
>> I have successfully used the K3 with FLDigi and a Signalink USB for 
>> quite some time now. However, I have never tried to control or even 
>> display the frequency on my FLDigi screen (Mac or PC). What 
>> connection should I have to the K3 in order to achieve this? How 
>> should I configure FLDigi for that purpose? Any help will be most 
>> welcomed! Thanks!
>>
>