[Elecraft] KSYN3A

[Mike Reublin NF4L]

Thanks, Fred. I'm looking forward to seeing your results.

73, Mike NF4L

> On May 3, 2015, at 5:23 PM, Cady, Fred <fcady at ece.montana.edu> wrote:
> 
> Hi all,
> I'm working on some before and after testing to try to get a handle on what we might hear with the new synthesizer.  I hope to have that done in a couple of days.  I'll put a link up on my website and post the information here.
> 73 and cheers,
> Fred KE7X
> 
> Author of:
> "The Elecraft K3: Design, Configuration and Operation 2nd ed"
> "The Elecraft KX3 - Going for the summit"
> "The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
> Printed, coil bound copies of these are all available at www.elecraft.com
> KPA500 and KAT500 Quick Set Up Guide
> http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
> KAT500 and KXPA500 Tuner Operation
> http://www.ke7x.com/home/kat500-and-kxpa100-tuners
> 
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
>> Mike Reublin NF4L
>> Sent: Sunday, May 03, 2015 12:04 PM
>> To: Elecraft List
>> Subject: [Elecraft] KSYN3A
>> 
>> What could I expect to actually hear differently (not lab measurements)
>> after the installation of the new synths? I have no interest in freqs
>> below 1.8MHz, I'm not a high-speed CW guy. I chase DX (SSB, CW, RTTY)
>> and do a bit of contesting to that end.
>> 
>> 73, Mike NF4L
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to fcady at ece.montana.edu