[Elecraft] KSYN3A

[Cady, Fred]

Hi all,
I'm working on some before and after testing to try to get a handle on what we might hear with the new synthesizer.  I hope to have that done in a couple of days.  I'll put a link up on my website and post the information here.
73 and cheers,
Fred KE7X

Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners

> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> Mike Reublin NF4L
> Sent: Sunday, May 03, 2015 12:04 PM
> To: Elecraft List
> Subject: [Elecraft] KSYN3A
> 
> What could I expect to actually hear differently (not lab measurements)
> after the installation of the new synths? I have no interest in freqs
> below 1.8MHz, I'm not a high-speed CW guy. I chase DX (SSB, CW, RTTY)
> and do a bit of contesting to that end.
> 
> 73, Mike NF4L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at ece.montana.edu