[Elecraft] K3 - MCU/FPF/DSP1 Firmware Update Failure

[Ross Primrose]

Check the owner's manual section on forcing a firmware download....

73, Ross N4RP

On 3/29/2015 9:22 AM, K M Dailey wrote:
> I just tried to update my K3/P3 with the latest firmware and the process has failed, leaving me with a pretty much dead K3 - MCU, FPF and DSP1 all showing as nothing installed, and the K3 Utility is reporting no comms with the K3.  The K3 itself powers on, but the display is completely blank.
>
> I’m running on Mac OS X 10.10 with the latest K3 Utility.
>
> Any ideas how I can get my radio working again? (:-(
>
> Thanks,
>
> Ken, G0RVH
>
>
>
> --
> Ken Dailey
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”