[Elecraft] KSYN3A newest firmware : VCO:MD menu entry still there and delivers error

[Klaus Dittrich]

K3 SN 8887

MCU 5.14 / DSP 2.83 / FPF 1.19, 2/26/2015
Latest Production Release

I still see CONFIG: VCO:MD -- and calibration started (digits count 
uwards) after leaving the menu but ends with an error after some time.


I assume this can be ignored, as the KSYN3A does not need calibration?

Or is the KSYN3A not recognized by the firmware?

--

73, Klaus, DF1TL