[Elecraft] Using PR6-10 with KPAK3AUX

[wb6rse1 at mac.com]

The PR6 staying on and inhibiting the use of a separate pass through RX antenna has come up several times. The solution is to use a DB15 M/F gender changer and twist off pin 11. Or if your don’t care about the future use of pin 11 in the cable in the ACC line to the KPA500, twist off pin 11 on the cable.

http://elecraft.365791.n2.nabble.com/KPA500-PR6-AUX-Cable-Pin-11-td7558085.html


73 - Steve WB6RSE