[Elecraft] Sluggish Encoders

[W0MU Mike Fatchett]

That is what support just told me too.

Sounds like a bad batch of encoders to me.

I may change them out when I get my new synthesizers.

Mike W0MU

On 3/12/2015 9:45 PM, Alan Sewell wrote:
> I had the same problem with my CMP / PWR encoder for several years. I
> finally replaced all four of the push button encoders last November. I
> wrote up what I did at <http://www.n5na.net/s9y/>.
>
> 73, Alan N5NA
>
> Date: Thu, 12 Mar 2015 12:34:43 -0700
> From: Dennis W0JX via Elecraft <elecraft at mailman.qth.net>
> To: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Sluggish Encoders
> Message-ID:
>          <1426188883.37643.YahooMailBasic at web162601.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
>
> My K3 also has been having trouble with sluggish encoders. The worst one is
> keyer speed. Sometimes (not always) turning the speed control doesn't
> change the speed. The power control takes FOREVER to move from 100 watts
> down to 50 or less. My shift control is jumpy at times but width seems to
> be OK.
>
> Since the speed and shift controls are not always problematic, I suspect a
> software conflict.
>
> 73, Dennis K3 #3481
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com