[Elecraft] Sluggish Encoders

[Alan Sewell]

I had the same problem with my CMP / PWR encoder for several years. I
finally replaced all four of the push button encoders last November. I
wrote up what I did at <http://www.n5na.net/s9y/>.

73, Alan N5NA

Date: Thu, 12 Mar 2015 12:34:43 -0700
From: Dennis W0JX via Elecraft <elecraft at mailman.qth.net>
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] Sluggish Encoders
Message-ID:
        <1426188883.37643.YahooMailBasic at web162601.mail.bf1.yahoo.com>
Content-Type: text/plain; charset=us-ascii

My K3 also has been having trouble with sluggish encoders. The worst one is
keyer speed. Sometimes (not always) turning the speed control doesn't
change the speed. The power control takes FOREVER to move from 100 watts
down to 50 or less. My shift control is jumpy at times but width seems to
be OK.

Since the speed and shift controls are not always problematic, I suspect a
software conflict.

73, Dennis K3 #3481