[Elecraft] Portable antenna for KX3

[Fred Smith]

After buying numerous antennas and spending way too much money on them, I finally came up with a good performer. The best part its cheap easy to build and erect in a short time.

It's only a 33' piece of copper wire with a 33' radial when used as a vertical. It can also be used as a sloper, or a dipole just as easy with just a few extra's.


73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 5210--K2/100 # 6470-KAT100
P3/SVGA--KAT500--W2
Amps Elecraft KPA500 HF/6m--Alpha's 9500 HF--87A HF--Mirage B-5030-G 300+w--(2) B-5016-G's 165w 2m



-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Michael Marx
Sent: Monday, March 09, 2015 8:05 PM
To: aar6ea at gmail.com; elecraft at mailman.qth.net
Subject: [Elecraft] Portable antenna for KX3

I have a Transworld antenna.  www.twantennas.com <http://www.twantennas.com/>  They are expensive.  They work GREAT.  It takes about 2 minutes to put one up and 2 minutes to take it down.  If you want a well built product that works look no further.  Again they ARE expensive.  But so was your KX3.  If you can’t make any contacts because your antenna is not effectve, then you’ve wasted your money on the KX3 which makes it far more expensive.  Read the testimonials on eham.net and the QST  & CQ reviews. 

73
Mike WB0SND


Michael Marx
sndtubes at vacuumtubes.com
636-939-9190

SND Tube Sales
105 N. Division St.
Bonne Terre, MO  63628




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to mfsj at totalhighspeed.com