[Elecraft] Filter Offset

[Dick Dievendorff]

Five pole filters (KFL3A-500 and KFL3A-2.7K) should have a label physically
attached to the filter that shows its offset.  

If it's a factory-built radio, filter offsets may be printed on a label
stuck to the underside of the top cover.

Eight pole filters should use an offset of zero.

73 de Dick, K6KR


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
evetsmd
Sent: Saturday, June 27, 2015 7:03 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Filter Offset

I have a K3 SN 6001, I see reference to a filter offset that's related to
each of the filters I purchased with the radio......where do I find that
filter offset info......

Any help appreciated

73
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com