[Elecraft] KSYN3A + KSYN3

[Don Wilhelm]

Russ,

If you install the KSYN3A for the main and then add the KRX3, you must 
have the KSYN3A for the sub as well.
You cannot mix the synthesizers - they must both be the same.

Cheap/thrifty/cost effective does not matter, they both need to be the same.

73,
Don W3FPR

73,
Don W3FPR

On 6/21/2015 8:59 PM, Russ wrote:
> All:
>
> For those of you who don't read instructions like me - remember to download and install the latest K3 utility before uploading the new 5.14 firmware (or above) - otherwise you may get an FPF load error.
>
> Question - if I decide to install a KRX3 later, can I reuse the old KSYN3 for it - can the old KSYN3 and the new KSYN3A coexist in the same box?  OK - call me cheap / thrifty / cost effective or just stupid if you want  :>}
>