[Elecraft] KSYN3A + KSYN3

[Michael Eberle]

Per the KSYN3A Installation instructions:

"You cannot have a new KSYN3A synthesizer and the original KSYN3 in the 
same K3!  If you have the KRX3 sub receiver installed, you must install 
two KSYN3A synthesizers."

Mike
KI0HA

On 6/21/2015 7:59 PM, Russ wrote:
> All:
>
> For those of you who don't read instructions like me - remember to download and install the latest K3 utility before uploading the new 5.14 firmware (or above) - otherwise you may get an FPF load error.
>
> Question - if I decide to install a KRX3 later, can I reuse the old KSYN3 for it - can the old KSYN3 and the new KSYN3A coexist in the same box?  OK - call me cheap / thrifty / cost effective or just stupid if you want  :>}
>
> Thanks, Russ KD4JO
>   		 	   		
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com
>