[Elecraft] 6 - 10 preamp not working

[Michael Eberle]

Does it work on 6 meters?  CONFIG->DIGOUT 1 is set on per-band basis but 
that is probably not a problem if it is getting 12 volts.

The first thing I would check if it doesn't work on 6 or 12, (because it 
is something I would likely do) is make sure it is connected on the back 
of the radio to RX In and Out and not XVTR In and Out.  Also check to 
see that the amp itself is has the PREAMP side connected to the radio 
and not BYPASS.

Mike
KI0HA

On 6/11/2015 2:08 PM, Larry Snyder wrote:
> I ordered the 6-10 preamp and it doesn't appear to work.
>
> I went to 10 meters on the K3.
>
> I set CONFIG->DIGIOUT I to ON.
>
> The 6-10 preamp will click with I unplug the 12 volts (so I know it is
> getting 12 volts).
>
>   
>
> Any ideas??
>
>   
>
> 73s HK2LS
>
>   
>
>   
>
>