[Elecraft] K3 KXV3B install problems

[ejkkjh at gmail.com]

Having problems with install of the KXV3B upgrading from a KXV3A.
The pins are two long on the KXV3B, with BNC connectors up as far as they will go in the rear slot?
I tried putting the pins in tilting the board with the BNC connectors not out of the slot, it was too much of an angle, they will not go in?
I guess I can cut the pins shorter on the KXV3B but wanted to check on that first.
Any help would be appreciated.  thank you 73
Emory  WM3M