[Elecraft] K3 Memory Question

[Dick Dievendorff]

I think we may be confusing different kinds of memory.

There are CW message memories, in two banks.

There are frequency memories that store VFO frequencies and modes, more than a hundred of these...

There are also memories for storing strings of commands (macros).

Dick, K6KR





> On Jan 25, 2015, at 08:36, David Cole <dave at nk7z.net> wrote:
> 
> Hi,
> No...  There are TWO banks of CW memory.  Not VFO, but banks of memory
> for CW...  Look at the programming tool, and you will see BANK 1 and
> BANK 2.  
> 
> Press and hold REC button on your K3 to switch between BANK 1, and BANK
> 2.
> 
> -- 
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
> 
> 
>> On Sun, 2015-01-25 at 03:55 +0000, Harry Yingst wrote:
>> as in both vfo A and B being programmed the same?
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________________
>> From: David Cole <dave at nk7z.net>
>> To: elecraft at mailman.qth.net 
>> Sent: Saturday, January 24, 2015 10:33 PM
>> Subject: Re: [Elecraft] K3 Memory Question
>> 
>> 
>> You are more than likely using BANK A and programming Bank B, or
>> vice-verse, with both programed the same this can happen.
>> -- 
>> Thanks and 73's,
>> For equipment, and software setups and reviews see:
>> www.nk7z.net
>> for MixW support see;
>> http://groups.yahoo.com/neo/groups/mixw/info
>> for Dopplergram information see:
>> http://groups.yahoo.com/neo/groups/dopplergram/info
>> for MM-SSTV see:
>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>> 
>> 
>>> On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:
>>> I also had one that did that I wound up just correcting it on the
>> radio
>>> 
>>> 
>>>     From: Larry Boekeloo <lboekeloo at sbcglobal.net>
>>> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
>>> Sent: Saturday, January 24, 2015 8:34 PM
>>> Subject: [Elecraft] K3 Memory Question
>>> 
>>> I have my K3 memories setup so I can hop and skip around the bands
>> and modes.  I use the K3 memory manager and it works well.  For
>> instance 20 mtrs:
>>> 
>>> 14.005 CW - Memory 27
>>> 
>>> 14.080 FSK D - Memory 28
>>> 
>>> 14.195 USB - Memory 29
>>> 
>>> 
>>> On 30 mtrs I have:
>>> 
>>> 10.105 CW - Memory 24
>>> 
>>> 10.120 CW - Memory 25
>>> 
>>> 10.140 FSK D - Memory 26
>>> 
>>> 
>>> However, every time I go to 10.140 (Memory 26) I have to change the
>> K3 from DATA A to FSK D.  I've deleted the memory, rewritten it but it
>> won't stay on FSK D  I have every band set up like that and 30 mtrs is
>> the only one I have trouble with.  Has anyone seen this or know what
>> I've done incorrectly?
>>> 
>>> Thanks.
>>> 
>>> Larry, KN8N
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to hlyingst at yahoo.com
>>> 
>>> 
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to dave at nk7z.net
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to hlyingst at yahoo.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com