[Elecraft] K3 Memory Question

[David Cole]

Hi,
No...  There are TWO banks of CW memory.  Not VFO, but banks of memory
for CW...  Look at the programming tool, and you will see BANK 1 and
BANK 2.  

Press and hold REC button on your K3 to switch between BANK 1, and BANK
2.
 
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Sun, 2015-01-25 at 03:55 +0000, Harry Yingst wrote:
> as in both vfo A and B being programmed the same?
> 
> 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> From: David Cole <dave at nk7z.net>
> To: elecraft at mailman.qth.net 
> Sent: Saturday, January 24, 2015 10:33 PM
> Subject: Re: [Elecraft] K3 Memory Question
> 
> 
> You are more than likely using BANK A and programming Bank B, or
> vice-verse, with both programed the same this can happen.
> -- 
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
> 
> 
> On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:
> > I also had one that did that I wound up just correcting it on the
> radio
> > 
> > 
> >      From: Larry Boekeloo <lboekeloo at sbcglobal.net>
> >  To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
> >  Sent: Saturday, January 24, 2015 8:34 PM
> >  Subject: [Elecraft] K3 Memory Question
> >    
> > I have my K3 memories setup so I can hop and skip around the bands
> and modes.  I use the K3 memory manager and it works well.  For
> instance 20 mtrs:
> > 
> > 14.005 CW - Memory 27
> > 
> > 14.080 FSK D - Memory 28
> > 
> > 14.195 USB - Memory 29
> > 
> > 
> > On 30 mtrs I have:
> > 
> > 10.105 CW - Memory 24
> > 
> > 10.120 CW - Memory 25
> > 
> > 10.140 FSK D - Memory 26
> > 
> > 
> > However, every time I go to 10.140 (Memory 26) I have to change the
> K3 from DATA A to FSK D.  I've deleted the memory, rewritten it but it
> won't stay on FSK D  I have every band set up like that and 30 mtrs is
> the only one I have trouble with.  Has anyone seen this or know what
> I've done incorrectly?
> > 
> > Thanks.
> > 
> > Larry, KN8N
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to hlyingst at yahoo.com
> > 
> > 
> >  
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to dave at nk7z.net
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hlyingst at yahoo.com
> 
> 
> 
>