[Elecraft] K1 ?

[Phil Wheeler]

"Other than they both fit into the same space and 
for that reason cannot be both present at the same 
time": Always these troublesome minor details, Don 
:-)

I suspect that if a 6-band K1 (say, with external 
ATU like the T1) had been doable, Wayne would have 
done it!

73, Phil W7OX

On 1/12/15 10:29 AM, Don Wilhelm wrote:
> Dale,
>
> Other than they both fit into the same space and 
> for that reason cannot be both present at the 
> same time - there is no problem.
> The offsets are remembered for all 6 bands.
> So if you replace the 4 band board with the 2 
> band board, all you need to do is set the menu 
> b1 parameter to 3.5 and the b2 parameter to 21.0 
> and you will be ready to operate.
>
> 73,
> Don W3FPR
>
> On 1/12/2015 1:06 PM, Dale Putnam wrote:
>> Is there any reason why, a 2 band module for 
>> the K1, couldn't be made for 80/15?
>> And installed with a 4 band (40-30-20-17)?
>> Thank you!
>>