[Elecraft] K1 ?

[Don Wilhelm]

Dale,

Other than they both fit into the same space and for that reason cannot 
be both present at the same time - there is no problem.
The offsets are remembered for all 6 bands.
So if you replace the 4 band board with the 2 band board, all you need 
to do is set the menu b1 parameter to 3.5 and the b2 parameter to 21.0 
and you will be ready to operate.

73,
Don W3FPR

On 1/12/2015 1:06 PM, Dale Putnam wrote:
> Is there any reason why, a 2 band module for the K1, couldn't be made for 80/15?
> And installed with a 4 band (40-30-20-17)?
> Thank you!
>
>