[Elecraft] K3 - MKII

[Evert Bakker]

Thanks Joe for helping me out.

Soundcard selected for TX in Router's DVK tab was  "microHAM CODEC" .
On the tab "audio mixer", the  LED's next to "TX VOICE/DIGITAL" were not
green.
On that same tab I changed the device from "microHAM CODEC" to "none" and
back again.
After that all seem to work.

I forgot to say in the first message that the "Test signal" button did work
(K3 > TX and modulating so giving output) 
I remember trying to  click the LED's next to "TX VOICE/DIGITAL" as they
were not green.

Thanks again.

73's, Evert PA2KW



-----Oorspronkelijk bericht-----
Van: Elecraft [mailto:elecraft-bounces at mailman.qth.net] Namens Joe Subich,
W4TV
Verzonden: zondag 11 januari 2015 16:00
Aan: elecraft at mailman.qth.net
Onderwerp: Re: [Elecraft] K3 - MKII


> When playing the DVK message, the K3 comes into TX, the MK2 shows the 
> bars (on the display and in the software of the MK2) moving, but no 
> output.

Check the sound card selected for TX in Router's DVK tab.  If that is not
"Headset Earphone (microHAM CODEC)" the audio will not reach MK II for
playback.  If that is correct, open the Windows Sound Mixer for "Headset
Earphone (microHAM CODEC)" and check both the "Headset Earphone" level and
the level for "microHAM USB Device Router" when you play a DVK message.
Finally, open Windows Control Panel | Playback Headset Earphone -> Levels
and check the balance (should be equal or all left).

73,

   ... Joe, W4TV


On 2015-01-11 7:19 AM, Evert Bakker wrote:
> Hello,
>
>
>
> Haven been using my K3 in combi with the Microham MK2 for several 
> years without problems.
>
> This morning, the sound from the DVK (in the MK2) doesn't seem to get 
> through to the K3.
>
>
>
> Using my normal mic (from headset) also through the MK2, and that works.
>
> When playing the DVK message, the K3 comes into TX, the MK2 shows the 
> bars (on the display and in the software of the MK2) moving, but no
output.
>
> I have had this problem  a couple of month ago as well, and I remember 
> I found it after spending quite some time.
>
> Unfortunately I can't recall the solution anymore. Tried several 
> things, but I guess I need a hint now.
>
>
>
> Did not change any settings (as far as I know).
>
>
>
> Any suggestion?
>
>
>
> 73's, Evert PA2KW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> lists at subich.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to evert at pa2kw.com