[Elecraft] K3 - MKII

[Joe Subich, W4TV]

> When playing the DVK message, the K3 comes into TX, the MK2 shows the
> bars (on the display and in the software of the MK2) moving, but no
> output.

Check the sound card selected for TX in Router's DVK tab.  If that is
not "Headset Earphone (microHAM CODEC)" the audio will not reach MK II
for playback.  If that is correct, open the Windows Sound Mixer for
"Headset Earphone (microHAM CODEC)" and check both the "Headset
Earphone" level and the level for "microHAM USB Device Router" when
you play a DVK message.  Finally, open Windows Control Panel | Playback
Headset Earphone -> Levels and check the balance (should be equal or
all left).

73,

   ... Joe, W4TV


On 2015-01-11 7:19 AM, Evert Bakker wrote:
> Hello,
>
>
>
> Haven been using my K3 in combi with the Microham MK2 for several years
> without problems.
>
> This morning, the sound from the DVK (in the MK2) doesn't seem to get
> through to the K3.
>
>
>
> Using my normal mic (from headset) also through the MK2, and that works.
>
> When playing the DVK message, the K3 comes into TX, the MK2 shows the bars
> (on the display and in the software of the MK2) moving, but no output.
>
> I have had this problem  a couple of month ago as well, and I remember I
> found it after spending quite some time.
>
> Unfortunately I can't recall the solution anymore. Tried several things, but
> I guess I need a hint now.
>
>
>
> Did not change any settings (as far as I know).
>
>
>
> Any suggestion?
>
>
>
> 73's, Evert PA2KW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>