[Elecraft] [K3] Tascam US-322 to K3

[Jim Brown]

On Tue,1/6/2015 11:10 AM, Don Wilhelm wrote:
> Digital modes normally use only the left channel, although there are 
> some applications that allow you to switch it to the right.

WSJT-X, MMTTY, and 2-Tone all can be set to decode either channel. 
WSJT10 only connect to the left channel. I've been lobbying with them to 
add channel switching.

> The K3 Line In and Line Out jacks are stereo type, but there is no 
> connection to the ring contact 

That's true only for a single-RX K3.

> , and the audio will only appear on the normal left channel. 

If you have the Sub-RX installed, it's audio will appear between ring 
and shell.

If you run MMTTY with WinWarbler, you can open a second 2Tone decode 
window. It can look at the same signal or the other RX.

73, Jim K9YC