[Elecraft] [K3] Tascam US-322 to K3

[Joel Black]

The dual decode works fine in cocoaModem. I used it quite a bit this past year with the W1AW/x stations working RTTY split. I have the second receiver and use my K3 with a CreativeLabs E-MU 0204.

73,
Joel - W4JBB

> On Jan 6, 2015, at 8:10 PM, Bill Frantz <frantz at pwpconsult.com> wrote:
> 
> On 1/6/15 at 11:10 AM, w3fpr at embarqmail.com (Don Wilhelm) wrote:
> 
>> Digital modes normally use only the left channel, although there are some applications that allow you to switch it to the right.
>> The K3 Line In and Line Out jacks are stereo type, but there is no connection to the ring contact, and the audio will only appear on the normal left channel.
>> So for the purpose of data modes on the K3, there is no need to be concerned about channel separation.
> 
> Reading the cocoaModem documentation, it looks like the DualRTTY mode will decode from both the right and left channels of the input. Since I don't have a sub-receiver in my K3, I can't test that it actually works, but being able to decode the pileup while monitoring the DX should be as nice in RTTY as it is in CW and SSB. (Yes, I really appreciate the dual watch feature of the KX3.)
> 
> I don't know if there are any programs for Linux or Windows that will do dual decode.
> 
> 73 Bill AE6JV